Rotomolding and blow molding is a high-density raw material professional production and processing equipment plus precise mold-controlled temperature to ensure the body is integrated, seamless and seamless, 2.5 or 4 engineering plastic threaded interface, used It is reinforced PP material, domestic advanced processing equipment, ensuring the production of each tank mouth is strong and durable under the premise of ensuring the production of tank mouth.

6 aluminum alloy flange interface, low density, high strength, good plasticity, can be applied to high temperature, corrosive working environment, to ensure long-term service life of the tank, packaging is FRP + reinforced glass fiber + high performance epoxy The resin is three-dimensionally wrapped and cured at a temperature of 45 to 50 for about 6 hours to completely fuse the resin and the glass fiber. The can body is firm and beautiful. Each batch of produced tanks is subjected to strict hydraulic testing to ensure that each tank meets stringent water pressure standards.

Small Tank Series (7-16dia. For Residential Application)

·Structure Material

Liner : PE ( Polyester ) ,Blow molding ,seemless without leakage

Outer Winding :High performance Fiber Glass and Epoxy Resin ;

Base: PP

Application Conditions

Working Pressure : 100psi/7bar or 150psi /10.5bar

Working Temperature :≤1-49℃

Max. Vacuum :127mm Hg

Lowest Environment Temperature : -27℃

Design Parameter

Burst Pressure : 600psi/42 bar ;Fatigure Cycle :100,000