Description
Submerged Membrane Filtration (SMF) technology is currently the first enterprise to realize the localization of submerged membrane filtration products and complete sets of technology. The submerged membrane system of Hydro Blue membrane Technology has high loading density, fast water intake and drainage, strong adaptability to inlet water, low operating energy consumption, high water recovery rate, small amount of water used for membrane cleaning, and every membrane module in the system can be convenient Separate inspection and replacement of the ground has achieved the perfect unity of system reliability and high maintenance efficiency, and has reached the international advanced level.
Hydro Blue Membrane Technology has accumulated rich experience in the transformation of sand filter into membrane filtration process. The original sand filter can be transformed into membrane tank, and the membrane method can be transformed without increasing the land occupation and investment of civil construction. Membrane filtration has become a powerful technology and equipment for municipal tap water, reclaimed water reuse and other industries for upgrading and transformation, as well as industrial complex water supply and reverse osmosis pre-filtration.
Advantage
1. Greatly improve the recycling rate, reduce waste water discharge, and reduce up to 30%;
2. Reduce pressure and reduce energy consumption, up to 35%;
3. Reduce cleaning frequency and chemical cost;
4. Higher water production efficiency and lower initial investment:
5. Ultra-high flux, the same pressure difference flux can increase up to 40%
6. Higher water production efficiency, fewer ultrafiltration membrane elements
7. The water production efficiency of the same land area can be increased by up to 120%
8. Greatly reduce downtime and cleaning time
A、Membrane fiber Spec | |||
Membrane material | PVDF | Membrane form | Outside-In hollow fiber membrane |
Outer/Inner Diameter | 1.0/2.2mm | Nominal Pore size | 0.04μm |
Breaking Strength | >200N | ||
B. Module Spec | |||
Membrane housing material | UPVC | End Cap material | UPVC |
Seal Material | EPDM rubber | Potting Material | Epoxy Resin |
Nominal Area | 40m2 | Size | φ160xL1987mm |
Dry Weight | 15kg | Wet Weight | 25kg |
C、Using condition | |||
Operation way | Negative pressure suction filtration | Design Flux | 20-55L/h |
Operating Temperature | 5-45℃ | Operating pH Range | 2-11(when cleaning 1-12) |
Max TMP Range | -80KPa | Max Backwash Pressure | 150KPa |
Backwash flux | 1.5-4.0m3/hr | Air wash flow | ≤2.5m3/hr |
D. Permeate water quality | |||
Permeate Turbidity | ≤0.1NTU | Permeate SDI15 | ≤3 |
Coliform | Not detected | Total number of colonies | Not detected |
Reviews
There are no reviews yet.